1080p VA panel with Freesync

Discussion Forum   Forums   Display discussion   1080p VA panel with Freesync

This topic contains 4 replies, has 2 voices, and was last updated by  b0uncyfr0 2 months, 2 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
Buying a monitor? Please refer to this thread. We appreciate your support!
  • Author
    Posts
  • February 2, 2017 at 9:04 pm #41544

    b0uncyfr0
    Participant

    Hi all, currently i cant seem to find a FreeSync monitor that matches these features:
    24″ – 26″
    VA Panel
    At most 75 Hz (i have no need for more fps ; as i prefer cranking up gfx)
    FreeSync
    1080p ( I downsample ; have no need for higher resolutions)

    All the options i find are either too big at 27″ or have 120hz – 144hz which i will never hit with my 290x unless i play at 720p (which i don’t intend to do). Any suggestions or recommendations would be greatly appreciated.

    Yes i have read the recommendations page.

    February 3, 2017 at 12:36 pm #41547

    PCM2
    Keymaster
    February 3, 2017 at 1:12 pm #41548

    b0uncyfr0
    Participant

    The C24F390FH is unfortunately 23.5″. I am currently using a 24″ and don’t intend to go any lower.

    February 3, 2017 at 1:22 pm #41549

    PCM2
    Keymaster

    0.5″ of diagonal screen space is a negligible difference – http://www.displaywars.com/24-inch-16×9-vs-23,5-inch-16×9. Many so-called 24″ models these days are 23.5″, 23.6″ or 23.8″. I think this is more a mental barrier than a real reason to discount it.

    And also, there is no substitute for actual pixel density. Downsampling may indeed improve image quality quite dramatically, but it is not equivilent to actually using a monitor of higher resolution and pixel density. If you’re happy enough with the results then fair enough, but don’t be misled into thinking you’re getting the same experience.

    February 14, 2017 at 5:54 pm #41611

    b0uncyfr0
    Participant

    Thanks PCM2. Much appreciated.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.